Used Groundsmaster® 4300

Daniel Foott — Sun, 31 May 2026 10:38:12 +0000

The Groundsmaster® 4300 rotary mower continues to provide the clean quality of cut of a reel mower but with the maintenance ease of a rotary. With a 2.3 m (90″) width of cut, the free-floating Contour Plus decks eliminate scalping, provide dramatic striping and deliver a picture perfect cut. Each of its five Contour Plus cutting units closely follows contours for an even cut on undulating terrain.

The Groundsmaster® 4300 has a lightweight footprint and CrossTrax® all-wheel drive for superior hill-climbing. The CrossTrax® system automatically transfers power from the front tyres to the opposite rear tyres to minimise spinouts and maximise traction on wet terrain. Its proven rugged frame, drivetrain and components ensure durability and long life.

With an average 2.67 hectares an hour of mowing capacity, Smart Power® with economy mode, switch-activated cruise control, electronically controlled hydrostatic pump and automatic, spring-applied parking brake, the Toro Groundsmaster 4300 delivers unsurpassed performance and value.

The Contour Plus cutting technology takes quality of cut to a whole new level
CrossTrax 4-wheel drive for superior hill-climbing
Lightweight design means less weight and turf compaction

Engine	Yanmar® 3-cylinder, turbo-charged diesel, Tier 4 Final, Stage V
Engine Power (kW)	43.4 hp (32.4 kW)
Fuel Type	Diesel
Fuel Capacity	51.1 litres
Cooling System	Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity
Air Filter	Dry, replaceable primary and optional safety element
Cutting Width	229 cm (90″)
Mowing Rate	Up to 2.6 hectares/hr
Deck Design	Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades	22” (55.9 cm) long, 2.5” (6.4 cm) wide, 0.25” (0.64 cm) thick combination blades
Spindle Housing	Ductile cast iron spindle housing
Spindle Bearings	Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Roll-Over Protection (ROPS)	2-post ROPS and seat belt standard
Armrests	Standard
Ground Speed – Forward	0-16.1 km/h
Mowing Speed	0-11.3 km/h
Traction Drive (System)	Electronically controlled hydrostatic pump with individual wheel motors. CrossTrax® All-Wheel Drive system standard, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors
Controls	Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console
Steering Controls	Rear wheel, power steering with an independent hydraulic pump circuit
Tyres	Front: 26.5″ x 14″ – 12″, 6-ply Rear: 20″ x 12″ – 10″, 6-ply
Seat	Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt
Ground Clearance	12.7 cm
Assembled Height Metric	215 cm
Weight	1,454 kg – with full fluids and 5 cutting units

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Browse through all Golf Mowers Australia & Mower World Commercial machines

Click here for more machines ! ↑

The post Used Groundsmaster® 4300 appeared first on Used Toro Golf Course Mowing Machinery Australia.

4300-D Archives - Used Toro Golf Course Mowing Machinery Australia

Used Groundsmaster® 4300

Click here for more machines ! ↑