Rough Mowers. Used Toro mowers for sale Australia Wide delivery.

Used Toro 3500-D Sidewinder®

Daniel Foott — Thu, 23 Jul 2026 10:06:26 +0000

The unique Toro Series/Parallel traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
The Contour Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power.
The ground-following design of each Contour Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.

The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.

Engine	Kubota® 3-cylinder, liquid-cooled diesel
Engine Power (kW)	25 hp (18.5 kW)
Fuel Type	Diesel
Fuel Capacity	41.6 litres
Cooling System	Rear-mounted, cross flow 4-row radiator
Air Filter	Remote-mounted 5″ Donaldson® air cleaner
Cutting Width	173 cm (68″) standard and 183 cm (72″) optional.
Mowing Rate	1.7 hectares/hr
Deck Design	10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5″ (3.8 cm) square x 0.25″ (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16″ (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades	Combination Blades: 27″ (68.6 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (0.64 cm) thick
Spindle Housing	Ductile cast iron spindle housing
Spindle Bearings	Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Armrests	Standard
Ground Speed – Forward	0-14 km/h
Mowing Speed	0-10 km/h
Traction Drive (System)	3-wheel drive hydrostatic series/parallel closed-loop transmission
Controls	Forward and reverse traction control pedals; mow/transport foot lever; hand activated parking brake; hand operated ignition key switch; tilt steering wheel lock; PTO switch; throttle; joystick control for deck raise and lower; cutting deck transport lock
Steering Controls	Hydraulic power steering, tilt wheel
Tyres	20″ X 10″-10″, 4-ply rating, Toro Turf Tread Rear tyres. 20″ X 12″-10″, 4-ply rating, Toro Turf Tread Front tyres
Seat	Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustment
Ground Clearance	15.3 cm
Assembled Width Metric	184 cm
Assembled Height Metric	193 cm
Weight	957 kg

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Toro 3500-D Sidewinder® appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 360 Quad-Steer™

Daniel Foott — Mon, 20 Apr 2026 00:18:21 +0000

The Toro® Groundsmaster® 360 Quad-Steer 4WD with All Season Safety Cab reinvents the way a mower performs. Powered by a 36 hp (26.8 kW) Kubota® 4-cylinder diesel engine, this machine utilises revolutionary Quad-Steer all wheel steering to maximise productivity. Climb hills without slipping. Make 180° turns without tearing turf. Hug the turns or side hills while mowing in total comfort. Groundsmaster® 360 Quad-Steer 4WD with All Season Safety Cab Models can be configured with one of the following decks: 183 cm side discharge (model 30540) 183 cm base deck (model 30542) which can be set up as either a rear discharge deck or Guardian® Recycler® deck

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 360 Quad-Steer™ appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 7210

Daniel Foott — Tue, 02 Dec 2025 07:53:36 +0000

Deck Options:
72″ side discharge
72″ rear discharge
72″ Guardian Recycler and Fine Cut Guardian kits

The Groundsmaster® 7210-D is a zero turn rotary mower that is rugged enough to be called a Groundsmaster. Powerful Yanmar 36.8hp (27.4kW), 3-cylinder, liquid cooled diesel engine combined with decks that use the industry’s toughest spindle assembly, match power and durability for commercial operators.

Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.
The deck shells are constructed from high-strength 7-gauge welded steel, for greater durability and long life.
The cast iron spindle housings feature greater stability and strength, providing longer deck and spindle life.

Engine	36.8 hp (27.4 kW) Yanmar® 3-cylinder, liquid-cooled, diesel
Fuel Capacity	43.5 liters, diesel. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend)
Drive Tyres	24″ x 12″ – 12″, 6-ply, turf tyre
Caster Tyres	15 x 6-6, 20-22, 4-ply ribbed tread, tubeless
Maximum Forward Speed	20 km/h
Cutting Width	72″ (183 cm)
Deck Materiall	7-gauge welded steel
Deck Type	Side discharge adjustable baffle, Rear discharge or Guardian® Recycler®
Height of Cut	1”-6” (25 – 152 mm) adjustable in 0.25” (6 mm) increments.
Spindle Housing	Ductile cast iron 9″ (23 cm) diameter conical spindle housing
Spindle Bearings	Premium greasable tapered roller bearings
Deck Hydraulic Lift	Raise/hold/lower/float; switch located on at end of right handle.

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 7210 appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 3500-D

Daniel Foott — Tue, 02 Dec 2025 07:35:37 +0000

The Contour Plus cutting technology takes quality of cut to a whole new level
Sidewinder cutting units shift left and right a total of 61 cm
The unique Toro Series/Parallel traction drive system provides steady traction in all conditions

The Groundsmaster® 3500-D is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour Plus cutting decks allow mowing of undulating terrain without scalping. The powerful 18.5 kw Kubota® engine and exclusive Series/Parallel traction drive system, gets the mowing job done quickly.

Sidewinder® Cutting Unit System

Sidewinder cutting units shift left and right a total of 61 cm. This allows the tyre tracks to be shifted within the mowing path to reduce wear on the turf.

Time Saving

Unlike any other mower on the market, the Groundsmaster® 3500-D allows you to be more productive. The 68″ (173 cm) width-of-cut allows you to mow generous swaths, yet its compact size and the Sidewinder® system also allow you to make tight maneuvers in trim areas. Locations normally requiring two different machines can be handled by one.

Quality of Cut

The new Contour Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. In addition, a unique directional vane and modified discharge opening deliver even clipping dispersion. An optional mulching kit is also available.

Scalp-Free Mowing

The ground-following design of each Contour Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.

Attractive Striping

Rear rollers provide an attractive striping effect while you mow, greatly enhancing the finished look of your turf.

Superior Traction

The patented Toro Series/Parallel traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimising tyre spinouts and scuffing.

Engine	Kubota® 3-cylinder, liquid-cooled diesel
Engine Power (kW)	25 hp (18.5 kW)
Fuel Type	Diesel
Fuel Capacity	41.6 litres
Cooling System	Rear-mounted, cross flow 4-row radiator
Air Filter	Remote-mounted 5″ Donaldson® air cleaner
Cutting Width	173 cm (68″) standard and 183 cm (72″) optional.
Mowing Rate	1.7 hectares/hr
Deck Design	10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5″ (3.8 cm) square x 0.25″ (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16″ (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades	Combination Blades: 27″ (68.6 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (0.64 cm) thick
Spindle Housing	Ductile cast iron spindle housing
Spindle Bearings	Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Armrests	Standard
Ground Speed – Forward	0-14 km/h
Mowing Speed	0-10 km/h
Traction Drive (System)	3-wheel drive hydrostatic series/parallel closed-loop transmission
Controls	Forward and reverse traction control pedals; mow/transport foot lever; hand activated parking brake; hand operated ignition key switch; tilt steering wheel lock; PTO switch; throttle; joystick control for deck raise and lower; cutting deck transport lock
Steering Controls	Hydraulic power steering, tilt wheel
Tyres	20″ X 10″-10″, 4-ply rating, Toro Turf Tread Rear tyres. 20″ X 12″-10″, 4-ply rating, Toro Turf Tread Front tyres
Seat	Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustment
Ground Clearance	15.3 cm
Assembled Width Metric	184 cm
Assembled Height Metric	193 cm
Weight	957 kg

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 3500-D appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 4700-D – Air-Con Cab

Daniel Foott — Sat, 29 Nov 2025 06:00:03 +0000

The Contour Plus cutting technology takes quality of cut to a whole new level
Mow up to 4.3 hectares per hour to get the job done fast
Smart Power® traction allows even an inexperienced operator to achieve a consistent cut

Is wider better? That’s like asking if more productivity is better. The Groundsmaster® 4700-D answers with a resounding yes, in the form of an awe-inspiring 381 cm width of cut, powered by a 48 hp (36 kW) Yanmar® engine that lets you mow up to 4.3 hectare/hour. Add in 7 floating Contour Plus cutting units, full-time 4-wheel drive and the innovative Smart Cool system, and you have productivity and performance no other mower can touch.

Air Conditioning

Toro offers factory-installed, climate-controlled cabs for large commercial mowers. These air-conditioned cabs feature built-in ROPS (Rollover Protection), pressurized air filtration to block dust, and 360-degree vents to keep operators comfortable in all weather. Toro designs these cabs to protect you from the elements while you work.

Contour Plus Rotary Cutting Unit

The Contour Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly. An optional mulching kit and optional high height of cut blade are also available.

Smart Power® Traction

Smart Power® Traction allows even an inexperienced operator to achieve a consistent cut, even on hills and thick patches. By automatically adjusting ground speed when encountering heavy cutting conditions, optimum blade speed is maintained.

SmartCool Auto-Reversing Cooling Fan

Engineered with our exclusive SmartCool technology, so when things heat up under the hood, the system briefly reverses the cooling fan to blast chaff and debris from the air intake screens. The result, is non-stop improved productivity.

Mini InfoCentre

With this feature you get helpful maintenance reminders and instant notification of potential problems. During normal operation, the InfoCenter displays clear and simple operating information at a glance, while constantly monitoring the internal health of the machine. Audible and visual alarms notify the operator of a potential problem. In the field or at the shop, technicians can quickly identify the source of the issue. Allows operator to adjust sensitivity of electronically controlled foot pedal when moving. This allows the supervisor to set a maximum mowing speed for greater control of operator usage and quality.

4-Wheel Drive

The Groundsmaster® 4500-D features a unique, parallel hydraulic traction system that assures full-time, bi-directional 4-wheel drive. Parallel hydraulic flow between front and rear wheels means that you will have 4-wheel drive assistance in turns, enabling easier trimming around objects without tire scuffing and dependable traction on hills and wet terrain.

Attractive Striping

Rear rollers provide an attractive striping effect while you mow, greatly enhancing the finished look of your turf.

Durable Design

Proven rugged frame, drivetrain, and components ensure durability and long life. Heavy-duty welded steel decks and frames provide extra durability and long life.

Easy Service

Decks can be raised or removed quickly, and enclosures can be pulled off without tools so technicians can get at everything effortlessly.

Engine	Yanmar® 4TNV84T diesel
Engine Power (kW)	48 hp (36 kW)
Fuel Type	Diesel
Fuel Capacity	83.3 litres
Cooling System	31.2 litres capacity with 10 micron remote spin-on filter, 9 row single pass cooler with tilt out for cleaning. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities. Rear-mount, single pass, 7-row radiator with 6.3 fins per inch, 13 U.S. qt. (12.3 L) capacity
Air Filter	Dry, replaceable primary and safety elements
Cutting Width	381 cm (150″)
Mowing Rate	4.3 hectares/hr
Deck Design	10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5″ (3.8 cm) square x 0.25″ (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16″ (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades	27″ (68.6 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (0.64 cm) thick combination blades
Spindle Housing	Ductile cast iron spindle housing
Spindle Bearings	Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Roll-Over Protection (ROPS)	2-post ROPS and seat belt standard
Armrests	Standard
Ground Speed – Forward	0-21 km/h
Mowing Speed	0-11.3 km/h
Traction Drive (System)	Parallel hydrostatic, closed loop system with full-time 4WD forward/reverse in low (mow) and high (transport) range. Variable displacement piston pump with electronic servo control powers dual speed piston motor drive into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed
Controls	Ignition switch, low and auto mow/transport range selection switch, PTO switch, light switch. Foot-operated traction pedal, individual foot-operated steering brake control of left and right wheels with parking brake lock. One 2-position lift switch
Steering Controls	Power steering with dedicated power source, tilt steering
Tyres	Front: 29″ x 14″ – 15”, 6-ply Rear: 20″ x 10″ – 10″, 4-ply
Seat	Premium seat with adjustments for operator weight via air ride suspension, seat fore/aft position, seat back angle, arm rest height and retractable seat belt
Ground Clearance	15.3 cm
Assembled Height Metric	217 cm
Weight	2,188 kg with full fluids

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 4700-D – Air-Con Cab appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 4700-D

Daniel Foott — Sat, 29 Nov 2025 03:53:02 +0000

The Contour Plus cutting technology takes quality of cut to a whole new level
Mow up to 4.3 hectares per hour to get the job done fast
Smart Power® traction allows even an inexperienced operator to achieve a consistent cut

Contour Plus Rotary Cutting Unit

Smart Power® Traction

SmartCool Auto-Reversing Cooling Fan

Mini InfoCentre

4-Wheel Drive

Attractive Striping

Rear rollers provide an attractive striping effect while you mow, greatly enhancing the finished look of your turf.

Durable Design

Proven rugged frame, drivetrain, and components ensure durability and long life. Heavy-duty welded steel decks and frames provide extra durability and long life.

Easy Service

Decks can be raised or removed quickly, and enclosures can be pulled off without tools so technicians can get at everything effortlessly.

Engine	Yanmar® 4TNV84T diesel
Engine Power (kW)	48 hp (36 kW)
Fuel Type	Diesel
Fuel Capacity	83.3 litres
Cooling System	31.2 litres capacity with 10 micron remote spin-on filter, 9 row single pass cooler with tilt out for cleaning. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities. Rear-mount, single pass, 7-row radiator with 6.3 fins per inch, 13 U.S. qt. (12.3 L) capacity
Air Filter	Dry, replaceable primary and safety elements
Cutting Width	381 cm (150″)
Mowing Rate	4.3 hectares/hr
Deck Design	10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5″ (3.8 cm) square x 0.25″ (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16″ (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades	27″ (68.6 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (0.64 cm) thick combination blades
Spindle Housing	Ductile cast iron spindle housing
Spindle Bearings	Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Roll-Over Protection (ROPS)	2-post ROPS and seat belt standard
Armrests	Standard
Ground Speed – Forward	0-21 km/h
Mowing Speed	0-11.3 km/h
Traction Drive (System)	Parallel hydrostatic, closed loop system with full-time 4WD forward/reverse in low (mow) and high (transport) range. Variable displacement piston pump with electronic servo control powers dual speed piston motor drive into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed
Controls	Ignition switch, low and auto mow/transport range selection switch, PTO switch, light switch. Foot-operated traction pedal, individual foot-operated steering brake control of left and right wheels with parking brake lock. One 2-position lift switch
Steering Controls	Power steering with dedicated power source, tilt steering
Tyres	Front: 29″ x 14″ – 15”, 6-ply Rear: 20″ x 10″ – 10″, 4-ply
Seat	Premium seat with adjustments for operator weight via air ride suspension, seat fore/aft position, seat back angle, arm rest height and retractable seat belt
Ground Clearance	15.3 cm
Assembled Height Metric	217 cm
Weight	2,188 kg with full fluids

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 4700-D appeared first on Used Toro Golf Course Mowing Machinery Australia.

Used Groundsmaster® 4000-D

Daniel Foott — Mon, 10 Nov 2025 23:49:56 +0000

Rops
4 post roll over protection system with front screen

Engine
Yanmar® 4TNV84T 4 cylinder, Turbo Charged diesel , 48 hp (36 kW) @ 2600 rpm

Fuel Capacity
79.5 litres

Transport Speed
0-24 km/h

Cooling System
SmartCool System – variable speed, temperature actuated reversing fan

Width of Cut
335 cm

Traction Drive
4 Wheel Drive, full-time bi-directional. Parallel hydrostatic, closed loop.

Dimensions
Overall height: 217 cm
Overall length: 342 cm
Overall width deck down: 345 cm
Transport width: 183 cm
Wheelbase: 140 cm

Weight
1,856 kg

*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.

Click here for more machines ! ↓

Browse through all Golf Mowers Australia & Mower World Commercial machines

The post Used Groundsmaster® 4000-D appeared first on Used Toro Golf Course Mowing Machinery Australia.