$59,990.00
*Excluding GST & Price’s starting from.
(All prices in AUD)
FINANCE AVAILABLE*
Fully Serviced Professionally Cleaned Hire Options Warranty Available Delivery Australia Wide 
Chris Paterson – PH – 0418755697
Danny Foott – PH – 0487962042
Freecall – 1800 704 574
Email – chris@golfmowersaustralia.com.au
Email – sales@golfmowersaustralia.com.au
We have similar machines with varying hours, please call for details!
The Groundsmaster® 4300 rotary mower continues to provide the clean quality of cut of a reel mower but with the maintenance ease of a rotary. With a 2.3 m (90″) width of cut, the free-floating Contour™ Plus decks eliminate scalping, provide dramatic striping and deliver a picture perfect cut. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.
The Groundsmaster® 4300 has a lightweight footprint and CrossTrax® all-wheel drive for superior hill-climbing. The CrossTrax® system automatically transfers power from the front tyres to the opposite rear tyres to minimise spinouts and maximise traction on wet terrain. Its proven rugged frame, drivetrain and components ensure durability and long life.
With an average 2.67 hectares an hour of mowing capacity, Smart Power® with economy mode, switch-activated cruise control, electronically controlled hydrostatic pump and automatic, spring-applied parking brake, the Toro Groundsmaster 4300 delivers unsurpassed performance and value.
| Engine | Yanmar® 3-cylinder, turbo-charged diesel, Tier 4 Final, Stage V |
| Engine Power (kW) | 43.4 hp (32.4 kW) |
| Fuel Type | Diesel |
| Fuel Capacity | 51.1 litres |
| Cooling System | Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity |
| Air Filter | Dry, replaceable primary and optional safety element |
| Cutting Width | 229 cm (90″) |
| Mowing Rate | Up to 2.6 hectares/hr |
| Deck Design | Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels |
| Blades | 22” (55.9 cm) long, 2.5” (6.4 cm) wide, 0.25” (0.64 cm) thick combination blades |
| Spindle Housing | Ductile cast iron spindle housing |
| Spindle Bearings | Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft |
| Height of Cut | 0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration |
| Roll-Over Protection (ROPS) | 2-post ROPS and seat belt standard |
| Armrests | Standard |
| Ground Speed – Forward | 0-16.1 km/h |
| Mowing Speed | 0-11.3 km/h |
| Traction Drive (System) | Electronically controlled hydrostatic pump with individual wheel motors. CrossTrax® All-Wheel Drive system standard, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors |
| Controls | Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console |
| Steering Controls | Rear wheel, power steering with an independent hydraulic pump circuit |
| Tyres | Front: 26.5″ x 14″ – 12″, 6-ply Rear: 20″ x 12″ – 10″, 6-ply |
| Seat | Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt |
| Ground Clearance | 12.7 cm |
| Assembled Height Metric | 215 cm |
| Weight | 1,454 kg – with full fluids and 5 cutting units |
*Please note used machines may vary from the specifications of a brand new machine. Descriptions are a guide only.
Click here for more machines ! ↓
Browse through all Golf Mowers Australia & Mower World Commercial machines
